We will find workers building disc-type scaffolding at the construction site. There are some steps to follow when using the disc-type scaffolding. So what should be paid attention to when using the disc-type scaffolding? Today, let’s learn about what should be paid attention to when using the dis

1. Stable foundation: Ensure that the ground is flat and solid. If necessary, use pads or bases to disperse the load to prevent settlement or tilting. 2. Material inspection: Check all components before installation to ensure that there is no damage, deformation, or corrosion. Unqualified materials

1. Fatigue peeling: The inner and outer raceways and rolling body surfaces of the rotating fastener bear both loads and roll relative to each other. Due to the action of the alternating load, cracks are first formed at a certain depth below the surface (shear stress), then extend to the contact s

The inspection of scaffolding fasteners is very important to ensure their safety and reliability during use. The inspection of scaffolding fasteners usually includes the following items: 1. Appearance inspection: Check whether there are cracks, deformation, rust, and other defects on the su

1. Fatigue peeling: The inner and outer raceways and rolling body surfaces of the scaffolding rotating fastener bear loads and roll relative to each other. Due to the action of alternating loads, cracks are first formed at a certain depth below the surface (at the maximum shear stress) and then e

The cup-hook steel pipe scaffolding consists of steel pipe uprights, cross bars, cup-hook joints, etc. Its basic structure and erection requirements are similar to those of the coupler-type steel pipe scaffolding, and the main difference lies in the cup-hook joint. The cup-hook joint consists of

In recent years, many large or special construction projects have chosen the new disc-type scaffolding. Not only that, the country has also begun to encourage construction parties to use disc-type scaffolding, especially for projects with high difficulty and large engineering volume, which must b

Standard practices for scaffolding wall ties, just remember the following 6 key points! 1. Scaffolding wall ties should be able to withstand tension and pressure 2. They should be set horizontally and within 300mm of the main node 3. Scaffolding wall ties must be set at both ends of the open f

1. Construction preparation (1) Before the scaffolding is erected, a special construction plan and safety technical measures should be formulated, and construction drawings should be drawn to guide the construction. The construction drawings should include plan drawings, elevation drawings, sect

1. Advanced technology: The disc-type connection method is the mainstream scaffolding connection method in the world. The reasonable node design can achieve that the force transmission of each rod is through the node center. It is an upgraded product of scaffolding, with mature technology, firm c

The scaffolding wall tie has two main functions: The first is to resist the horizontal force generated by the wind on the scaffolding and transfer it to the structure. The second is to serve as an intermediate constraint of the frame to reduce the calculated length of the vertical pole. Throug

1. Advanced technology: The disc-type connection method is the international mainstream scaffolding connection method. Reasonable node design can ensure that all rods transmit force through the node center. It is an upgraded product of scaffolding with mature technology, firm connection, stable s