First, scaffolding performance requirements 1. Should meet the design requirements of bearing capacity 2. No deformation that affects normal use should occur. 3. It should meet the use requirements and have safety protection functions. 4. Scaffolding attached or supported on the engineering s

Newcomers to engineering cost, come and learn how to calculate scaffolding! First, the calculation method of scaffolding Erection size: the vertical distance of the vertical pole is 1.20 meters, the horizontal distance is 1.05 meters, and the step distance is 1.20 meters. Steel pipe type:

1. Can the parapet and gutter baffle on the exterior wall be counted as external scaffolding? Answer: If there is a parapet on the exterior wall, the height of the external scaffold can be calculated to the top of the parapet. When the vertical height of the gutter baffle (from the bottom of the

Are you worried about the cost calculation of scaffolding? Don’t worry, here is a comprehensive guide to scaffolding cost calculation! First, we need to understand how to calculate scaffolding. Comprehensive scaffolding is a common calculation method that combines the costs of various scaff

First, when should scaffolding be accepted? Scaffolding should be accepted at the following stages 1) After the foundation is completed and before the frame is erected. 2) After the first step of large and medium-sized scaffolding, the large crossbar is erected. 3) After each 6~8m height is e

The construction of coupler scaffolding is an important part of construction safety. The following are some key requirements: 1. Basic requirements: The scaffolding should be built on a solid and flat foundation, and a pad or base should be added. In the case of an uneven foundation, measures shoul

First, the calculation rules of scaffolding: 1. When calculating the internal and external wall scaffolding, the area occupied by door and window openings, empty circle openings, etc. does not need to be deducted. 2. If the height of the same building is different, remember to calculate it sepa

First, causes of scaffolding safety hazards 1. The scaffolding is not erected strictly by the scaffolding construction plan (technical disclosure); 2. The inspection and acceptance of the scaffolding are not in place These hazards mainly exist in the construction preparation stage and human fa

A special safety construction plan should be prepared for the erection of portal scaffolding, and the structural design should be calculated reviewed, and approved by regulations. The specifications, performance, and quality of the portal frame and its accessories should comply with the provision

First, the foundation treatment of the scaffolding (1) The foundation of the erection frame must be flat and solid, with sufficient bearing capacity; there must be no water accumulation in the erection site. (2) During the erection, drainage ditches or other drainage measures should be set up o

1. Requirements for pole structure 1) The bottom poles of the scaffolding are arranged in a staggered manner with steel pipes of different lengths. The distance between the joints of two adjacent columns in the height direction should not be less than 500mm; the distance between the center of ea

First, specifications for setting up the foundation of the pole 1. The foundation should be flat and compacted, and the surface should be hardened with concrete. The ground-mounted pole should be placed vertically and stably on a metal base or a solid base plate. 2. Vertical and horizontal swee